Kelboy Launcher - scan network (wifi menu)

Connect the Kelboy 2 to Internet

How to connect our console running the official distribution to the Internet
Bit
21-02-2021
Kelboy Launcher - scan network (wifi menu)

If it is correctly connected to the internet and to a local Wi-Fi network then the pop-up windows will show the information in a new information window.

If, on the other hand, what you want is to configure it by hand, you will not have any difficulty.

The configuration file is located in /etc/wpa_supplicant/wpa_supplicant.conf.

An example of configuration for the country Spain:

Getting connected to a modern wireless network in Linux-based distributions, using the wpa_supplicant daemon is the most common thing you can find in this world.

To configure our connection we have two options available:

  1. Through the Launcher
  2. Directly by editing the wpa_supplicant daemon configuration file

If we want to enter the launcher menu we will find:

Image

Then we enter the wifi menu to configure it:

Image

Then we scan for our network and select it (you can also enter the network name manually by clicking on "network name"):

Image

We select the network and enter our network password from the password option:

Image

Finally we save:

Image

Once the console is restarted, we will find that it is connected to the network. To check it you can verify your internal and external ip (if you have an internet connection). From the settings menu:

Image

Una vez allí tendremos las dos opciones:

Image

If it is correctly connected to the internet and to a local Wi-Fi network then the pop-up windows will show the information in a new information window.

If, on the other hand, what you want is to configure it by hand, you will not have any difficulty.

The configuration file is located in /etc/wpa_supplicant/wpa_supplicant.conf.

An example of configuration for the country Spain:

country=ES
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
    ssid="MOVISTAR_XYZT"
    #psk="my_StrongP@ssword1"
    psk=97b73dabcdb33b648442b26d249447c363634d5f73940ce8fec1a6525190fc2c
}

With this you will have your kelboy 2 connected to the internet.

Kelboy 2.0
This article is considered part of offered documentation by Lemoncrest products.
Comments
Page 1Page 1ear iconeye iconFill 23text filevr